• 任職要求：

1. 五年以上機械組裝工藝開發及管理相關工作經驗(具有氣囊組裝經驗的優先)；Over 5 years in mechanical assembly manufacturing relevant industry for process development and management (Airbag assembly process experiences are preferred).

2. 有較強的機械設計和電氣自動化應用經驗（具有機械手/自動化組裝設備經驗的優先）（Strong mechanical design and electric control automation application experience (Robot technology experience or other automation application experiences are preferred).

3. 有較強的問題分析、項目管理和團隊協調能力；Strong ability of problem analysis, projects management and coordination;

4. 能熟練運用SPC, MSA, PFMEA等質量管理工具；Good at tools of quality management such as SPC,MSA, PFMEA,

5. 有日語或韓語語言背景的優先。

崗位職責：
1 New project
1）Attending discussion for new project automation solutions. 參與新項目自動化方案討論
2）Design new station or line modification concept according to new project request, 根據新項目需要設計新站的概念或者生產改造概念
3）New line investment analysis and submit CAPEX for approve. 新生產線投資分析, 遞交CAPEX報批
4）Optimizing production line process, reducing production cost, improve quality control, and improve productivity according to APS. 根據奧托立夫生產系統要求，優化生產線工藝，降低生產成本, 提高產品質量控制, 提高生產效率。
5）Do good line balance for improve productivity, 做生產線平衡, 提高生產效率
6）Layout optimization，布局優化
PFMEA Go & See for good quality control, 做PFMEA Go & See, 提高產品的質量可靠性
7）Error proof list maintenance, and check and update on line. 防錯一欄表維護, 生產線實地檢查, 維護優化.
8）Support AMC layer audit. 支持AMC開展分層審核
2 Process Standardization.
1）Involve the Global process Audit, and the process standardization. 參與工藝過程全球標準化的審核,和改進工作.
2）Support to One P One P. 推行Autoliv的一個產品一個標準過程.
3）MPS Audit and improve. 負責工廠的MPS審核和改進.
4）Good SMED to improve the productivity. 推行快速換模, 提高生產效率.
5）Good Line Balance to improve the productivity. 優化生產線平衡，提高生產效率
3 Trouble Shooting
1）Trouble shooting for all the quality risk and improve. 所有和產品質量有關的問題分析,改進.
2）Process and machine improve for Cate. A and NCE. 針對Cate. A 和NCE進行過程改進和設備改進.
3）Support process audit and optimize process 支持過程審核，并優化工藝過程