總述:
Develop test solutions for
new defined products, including Test Plan, Test hardware and test program. This
test solution is subject to release to testfloor for mass production 開發新定義產品的測試方案，包括測試計劃，測試硬件和測試程序。該測試方案會發布給生產車間做大量產品的測試
工作職責:
1. Test Engineer develops
the entire test solution for new products to meet the mass production
requirements..測試工程師為新產品開發全面的測試解決方案以滿足產品量產的需要
2. Test Engineer collects
the data and feedback to other Engineering group (PE, DE), and provide support
during new product development. 測試工程師搜集數據并反饋至其他相關工程部門（如產品工程部，設計部），為新產品研發提供相關支持
3. Test Engineer supports
the test floor to solve any test related problems during mass production. 測試工程師為生產部提供支持以解決在產品量產過程中的相關測試問題
崗位要求:
1. M.S. degree in
Electronic Engineering. Will also accept B.S. degree with 5 years experience in
job offered or related position. 電子工程相關專業畢業的碩士研究生，或擁有5年以上同等崗位的本科生
2. Familiar with
semiconductor testing methodology, experience in digital-analog mixed chip and
SOC chip testing is preferred, and experience in high-speed IC testing such as
SerDes/DDR/PCIE is preferred. 熟悉半導體測試方法論，有數模混合和SOC芯片測試經驗者優先，有serdes/DDR/PCIE等高速芯片測試經驗者優先
3. Proficient in high
speed IC ATE load board schematic and layout design. 精通高速芯片ATE load board schematic和layout設計相關知識
4. Familiar with DFT
basics, such as JTAG/SCAN/MBIST, etc. 熟悉DFT基礎，如JTAG/SCAN/MBIST等
5. Good programming and
debugging skills in VB，C/C++, Verilog/VHDL
and FPGA. 具備良好的設計和調試能力,熟悉VB，C/C++，Verilog/VHDL 和 FPGA
6. Familiar with J750,
UltraFlex, Advantest V93K and other SoC test platforms. 熟悉J750，UltraFlex，Advantest V93K等常用SoC測試平臺
7. Proficient in the use
of various test instruments, including but not limited to high-speed
oscilloscopes, logic analyzers, etc. 精通各測試儀器的使用，包括但不限于高速示波器、邏輯分析儀等
8. Good communication and
team work skills. 具備良好的溝通技巧和團隊精神
9. Good English reading,
writing, listening and speaking skills, CET-4 is a must, CET-6 or above is
preferred. 具備良好的英語聽、說、讀、寫能力，需通過大學英語四級，通過大學英語六級者優先