職位描述
汽車行業質量管理體系SOPIATF16949CONTROL PLAN汽車研發/制造
JD for Process Quality Engineer制程質量管理
崗位描述 Job Description
1. Take over quality issues for mass production to reduce the failure rate and non-conforming parts handling to avoid customer quality complaint. 負責量產后的質量問題，降低故障率和不合格件的處理以避免客戶的質量投訴。
2. Take over quality risk prevent for process development in process for in project phase.負責前期過程開發的質量控制,并質量風險遏制在項目前期。
3. Create and update control plan /WI/Check list to make sure the control method delivery to production. Take part in PFMEA creation and audit.
4. 負責編制和更新控制計劃、檢驗作業指導書、表單，并將定義的質量控制方法傳遞到現場。參與PFMEA制定與審核
5. Push internal improvement by standing on the position of customer. Handle customer complain about quality to satisfy the customer, do 8D report. 站在客戶的角度推進內部質量改進。
6. Support QPC to identify root cause and take actions when there is customer compliant。與QPC團隊一起分析客戶抱怨的原因和采取相應的措施。
7. Take part in process development ECM/ECR for early quality prevention. 參與過程開發及變更的風險評估。
8. Summarize quality information, handle ongoing product, customer complaint, FPY, 0Km＆Field returns, do analysis, improvement and report. 匯總質量信息，處理生產線改進、匯報，制作質量掛圖。
9. Monitor the Nonconforming Quality Expense and reduce the scrap and internal cost.監控不良質量成本及減少生產報廢等內部成本。
10. Prepare PPK/CPK annual plan and implementation.負責編制過程能力研究年度計劃和完成過程能力研究.
11. Support ME for MSA annual plan and MSA report & method.支持制造工程師MSA報告及方法和MSA年度計劃.
12. Make and maintenance master and dummy samples.制定和維護產線的標準樣件，完善缺陷樣件
13. Arrange annual validation test for product and follow up the test result.安排并跟蹤產品年度試驗
14. Involvement in external or carrying out internal audits. 參與內外部審核。
15. Support for other specify topic from supervisor or managers. 上屬指定的其他問題.
任職資格 YOUR QUALIFICATIONS
1.Bachelor or above, science and engineering, especially mechanical, electrical engineering or electronics.
2.Familiar with IATF 16949 , VDA 6.3, Professional knowledge of quality tools （SPC, MSA, APQP, PPAP, FMEA.）. Problem Solving Skill（8D, FTA, 5 Why etc.）
3.At least 5 years’ experience in quality process control for new project and mass production.
4.Workable in oral and written English.
崗位描述 Job Description
1. Take over quality issues for mass production to reduce the failure rate and non-conforming parts handling to avoid customer quality complaint. 負責量產后的質量問題，降低故障率和不合格件的處理以避免客戶的質量投訴。
2. Take over quality risk prevent for process development in process for in project phase.負責前期過程開發的質量控制,并質量風險遏制在項目前期。
3. Create and update control plan /WI/Check list to make sure the control method delivery to production. Take part in PFMEA creation and audit.
4. 負責編制和更新控制計劃、檢驗作業指導書、表單，并將定義的質量控制方法傳遞到現場。參與PFMEA制定與審核
5. Push internal improvement by standing on the position of customer. Handle customer complain about quality to satisfy the customer, do 8D report. 站在客戶的角度推進內部質量改進。
6. Support QPC to identify root cause and take actions when there is customer compliant。與QPC團隊一起分析客戶抱怨的原因和采取相應的措施。
7. Take part in process development ECM/ECR for early quality prevention. 參與過程開發及變更的風險評估。
8. Summarize quality information, handle ongoing product, customer complaint, FPY, 0Km＆Field returns, do analysis, improvement and report. 匯總質量信息，處理生產線改進、匯報，制作質量掛圖。
9. Monitor the Nonconforming Quality Expense and reduce the scrap and internal cost.監控不良質量成本及減少生產報廢等內部成本。
10. Prepare PPK/CPK annual plan and implementation.負責編制過程能力研究年度計劃和完成過程能力研究.
11. Support ME for MSA annual plan and MSA report & method.支持制造工程師MSA報告及方法和MSA年度計劃.
12. Make and maintenance master and dummy samples.制定和維護產線的標準樣件，完善缺陷樣件
13. Arrange annual validation test for product and follow up the test result.安排并跟蹤產品年度試驗
14. Involvement in external or carrying out internal audits. 參與內外部審核。
15. Support for other specify topic from supervisor or managers. 上屬指定的其他問題.
任職資格 YOUR QUALIFICATIONS
1.Bachelor or above, science and engineering, especially mechanical, electrical engineering or electronics.
2.Familiar with IATF 16949 , VDA 6.3, Professional knowledge of quality tools （SPC, MSA, APQP, PPAP, FMEA.）. Problem Solving Skill（8D, FTA, 5 Why etc.）
3.At least 5 years’ experience in quality process control for new project and mass production.
4.Workable in oral and written English.
工作地點
同安區海拉(廈門)電氣有限公司
相似職位
- 品質工程師5000-10000元·13薪
廈門 - 同安
福建盈方光電科技有限公司 - CQE客戶質量工程師1.1-1.3萬
廈門 - 翔安
廈門源乾電子有限公司 - 質量部經理1.2-2.2萬·13薪
廈門 - 翔安
廈門三和盛科技有限公司 廈門 - 集美
大禾眾邦(廈門)智能科技股份有限公司- 品質主管8000-10000元·13薪
廈門 - 翔安
輯美包裝印刷科技(廈門)有限公司 - 高級研發質量工程師1.3-1.7萬·14薪
廈門 - 同安
海拉(廈門)電氣有限公司
熱門公司推薦
- 霸王茶姬招聘
- 肯德基招聘
- 順豐招聘
- 美團招聘
- 京東招聘
- 餓了么招聘
- 比亞迪招聘
- 中國一汽招聘
- 北京汽車招聘
- 蔚來招聘
- 東風汽車招聘
- 長城汽車招聘
- 奇瑞汽車招聘
- 理想汽車招聘
- 長鑫存儲招聘
- 天江藥業招聘
- 藍月亮招聘
- 安踏招聘
- TCL招聘
- 海信招聘
- 聯想招聘
- 海康威視招聘
- 寧德時代招聘
- 中興招聘
- 新松招聘
- 京東方招聘
- 申通招聘
- 圓通招聘
- 中通招聘
- 百世物流招聘
- 德邦物流招聘
- 麥當勞招聘
- 星巴克招聘
- 海底撈招聘
- 蜜雪冰城招聘
- 瑞幸招聘
- 雀巢招聘
- 騰訊招聘
- 百度招聘
- 快手招聘
- 字節跳動招聘
- 新華網招聘
- 小米招聘
- 招商銀行招聘
- 中信銀行招聘
- 北京銀行招聘
- 興業銀行招聘
- 交通銀行招聘
- 建發集團招聘
- 中國移動招聘
- 中國聯通招聘
- 中國電信招聘
- 中糧集團招聘
- 國藥控股招聘
- 中廣核招聘
- 中國船舶招聘
- 強生中國招聘
- 匯豐中國招聘
- 宜家招聘
- 立邦中國招聘
- 伊利招聘
- 青島啤酒招聘
- 京港地鐵招聘
- 寶馬招聘
- 小鵬汽車招聘
- 華為招聘
- 特斯拉招聘
- 吉利招聘
- 奔馳招聘
- 海爾招聘
- 美的招聘
- 京東方招聘
- 施耐德電氣招聘
- 德邦物流招聘
職位發布者
付女士/招聘專員
剛剛活躍立即溝通
海拉(廈門)電氣有限公司海拉（廈門）電氣有限公司（簡稱HED）是海拉集團控股的公司，它是2011年8月在廈門注冊成立的生產汽車?yán)^電器及其它汽車電子控制產品的德資企業。其股東為Hella KGaA Hueck&Co,海拉胡克公司是世界級汽車電子供應商，擁有領先的汽車電子設計，開發及制造技術。HED坐落于廈門火炬高新區同集園集成路1446號廠房***層，其致力于汽車?yán)^電器等汽車電器及汽車電子控制產品，主要生產S2,Micro等型號的繼電器，廣泛地應用在汽車的控制系統、門鎖系統、車窗升降、天窗控制、座椅調節、車燈控制、冷卻系統、ABS系統，也可用于工程車輛及其他自動化控制設備中。公司主要客戶有上海大眾，一汽大眾，上海通用，現代汽車等整車廠；德爾福汽車線束，汕頭YAZAKI等汽車配件一級供應商。 Hella(Xiamen) Electronic Device Co., LTD(Abbreviation HED) was co-founded by Hella Group. It registering at Xiamen in August 2011. It produce automotive relays and other automotive electronics control products. Its shareholder is Hella KGaA Hueck& Co. Hella KGaA Hueck& Co. is a wordwide level automotive electronics supplier. It posses leading automotive electronic design, development and manufacturing technology.HED is located at 1st floor NO.1446, Jicheng RD, Tongji Park, Huoju Gaoxin Dist, Xiamen. HED will produce automotive relays and other automotive electric equipment, automotive electronic control products. It mainly produce S2, Micro and other type of relays. These relays are widely used at automotive control system, lockstitch of door, car window’s up-down, top window’s controlling, chai’s adjustment, car light’s controlling, cooling system, ABS system. And these relays may also be used in engineering car and other automation control equipments. The company’s main customer is VW Shanghai, VW Yiqi, GM Shanghai, Morden Car and other OEM plant; Delphi automotive’s wire harness, Shantou YAZAKI and other automotive replacement tier 1 supplier.
公司主頁