崗位職責：
1.Keep machine, tooling running in good condition and make improvement
保持機器設備、儀器的正常運行與改善；
2.Optimize process, reduce production waste and cycle time
優化生產步驟，降低生產成本和時間；
3.Support production line to eliminate technical problem proactively
主動并及時協助生產線排除技術障礙問題；
4.Plan and act to remove additional activities to improve efficiency
策劃并協助生產線減少浪費，提高生產效率；
5.Design and purchasing application for tooling and fixtures
工治具的設計、制作、改進和申購；
6.Make suggestions in SOP/PI revision
建議修訂和完善所有產品的工藝說明；
7.Process setup, sustaining and improvement
制程的建立，改善和維護；
8.Training operators for all process stations
負責所有工藝培訓；
9.Raw material trial run for qualification
參與原材料試產，確認原材料的可行性；
10.In charge of transfer process setup, sample building and production instruction
負責轉移產品的工藝流程建立，樣品的制作和指導試生產；
11.As a team member to finish new product FMEA
協助完成新產品的FMEA。
任職要求：
1、College or BS degree in related mechanical or electronically Science/Engineering
大專以上學歷，機械或電子專業。
2、3+ years’ working experience as engineer in multinational manufacturing companies.
3年以上外企工作經驗。
3、3+years cable assembly or connector related working experience.
3年及以上線束或連接器工作經驗。
4、Have good English speak/read skill. 具有良好的英語讀說能力
5、Be familiar with CAD, SolidWorks or Pro/E software 熟悉CAD, SolidWorks 或Pro/E繪圖軟件
6、Familiar with fixture concept design.，Familiar with ERP system熟悉治工具設計、熟悉ERP系統流程；
7、Familiar with harness production Process flow and PFMEA熟悉線束裝配生產工藝流程和PFMEA
8、Familiar with TS16949/ GB 16151-2008 and other system standards熟悉TS16949/ GB 16151-2008等體系要求
9、Familiar with CC/SC definition and application 熟悉CC/SC的定義和應用；
10、Familiar with basic requirement for error-proofing and fool-proofing熟悉防呆防錯的基本要求 ；
11、Have knowledge of vehicle cable product application. 了解汽車線束產品應用；
12、Familiar with APQP document requirements and work standards 熟悉APQP文件的要求和制作標準；